top of page

CARE INSTRUCTIONS FOR FLOORS COATED WITH VESTING LED-HARD WAX OIL

​

 

   FLOOR CARE INSTRUCTIONS   

​

  • Vacuum your floor regularly.

  • Use a moist non looped fiber micro-fiber mop for cleaning of timber floors.

  • Use lukewarm water to clean your timber/concrete/stone floor, if necessary add small amounts of Vesting Intensive Cleaner.

  • Use Vesting Wax&Clean after a thorough clean with Vesting Intensive Cleaner every 3 months or as needed. Strictly follow dilution ratio, remember that more is not better.

​

   CAUTION                                                                                                                   

​

  • DO NOT use any chemicals, such as: cleaning products that are formulated with ammonia, high concentrations of acids and/or alkaline; spirits and/or acetone; cleaning products that are formulated to attack oil and grease; scrubs and heavily abrasive products, for cleaning your floor.

  • DO NOT use looped fiber sweepers, mops or abrasive pads.

  • DO NOT use large amounts of water or cleaning products to clean your floor.

HOW TO USE

WaxandClean_ImgID1.png

 

 

VESTING INTENSIVE CLEANER​

​

Vesting Intensive Cleaner is a highly concentrated cleaner for a regular and thorough cleaning of timber/concrete/stone floors treated with Vesting LED Hard Wax Oil. It is also suitable for lacquered surfaces. Cleaner is fresh-scented, made of natural ingredients, skin-friendly, ocean-friendly, anti-static.

Instructions: Dilute 30 ml of Vesting Intensive Cleaner in 5L of lukewarm water, moisten the mop and clean the floor, wait for the floor to dry.

1L of Vesting Intensive Cleaner approximetaly lasts for 17 months if used as directed.

WaxandClean_ImgID1.png

 

 

VESTING WAX & CLEAN​

​

Vesting Wax&Clean is a water-based maintenance and cleaning product for timber/concrete/stone floors treated with Vesting LED Hard Wax Oil.

Instructions: Clean your floor with Vesting intensive Cleaner; prior to use dilute 100-150ml of Vesting Wax&Clean in 5L of lukewarm water, moisten the mop and apply to the floor (going with the grain of the timber for timber floors). Apply Vesting Wax&Clean to your floor once every 3 months or as needed.


CAUTION: Do not apply too thick and more often than every 2 months.


1L of Vesting Wax&Clean approximetaly lasts for 30 months if used as directed.

WaxandClean_ImgID1.png

​

 

VESTING PURE NATURAL SOAP

​

Vesting Pure Natural Soap is used for normal maintenance of all oiled floors. Vesting Pure Natural Soap is 100% vegetable based. It reinforces durability of the floor with each cleaning. 

Instructions: Clean your floor with Vesting Intensive Cleaner; shake well before use; dilute 125ml in 5L of lukewarm water; clean the floor and remove excessive water from the floor immediately; never drench or allow water to pool and sit; allow the floor to dry for at least 20 mins before walking on it.

​

CAUTION: Do not use in combination with Vesting Wax&Clean.

​

1L of Vesting Wax&Clean approximetaly lasts for 16 months if used as directed.​

bottom of page